MAK FrSky Horus / OpenTX Model Pictures

FrSky Horus radios have good quality TFT display, so it is possible to have nice pictures of RC models.

The below pictures were adapted for FrSky Horus radios by myself, usually based on official product images or logos.

Read moreMAK FrSky Horus / OpenTX Model Pictures

Swashplate Leveler for XLPower Specter 700

3D printed swashplate leveler. Handy tool to setup proper geometry of RC helicopter main rotor head.

This one will work with XLPower Specter 700, or any model helicopter with 15mm main shaft and similar swashplate diameter.

Read moreSwashplate Leveler for XLPower Specter 700

MAK RC Signal Inverter

In RC hobby signal inversion may be required when connecting various components together, i.e. RC receivers to helicopter flybarless units or other flight controllers. This is particularly often required in case of one wire protocols, like SBUS, PPM or Smart Port – the last one being specific to FrSky products.

Read moreMAK RC Signal Inverter

MAK Dynatron Heli Holder

MAK Dynatron Heli Holder - ALL

The Sullivan Dynatron S603 is very popular, heavy-duty starter for gas and nitro RC model engines. Combined with Sullivan S613 Helicopter Extension Wand it creates great set for nitro helicopters, easily able to start 90 / 105 class nitro engine and which will last decades of usage.

Unfortunately plastic holder parts provided with the Dynatron are very basic and do not allow to mount the battery in compact, convenient way. That’s why I created my own holder, able to hold both battery and heli extension wand.

Read moreMAK Dynatron Heli Holder

MAK RC Model Finder

There are many popular lost RC model finders available on the market. They are usually simple and inexpensive devices, activated by signal loss or inactivity on RC channel which they are connected to, after some pre-defined time.

They work, but they are rather cumbersome in use, as they often activate themselves in unwanted conditions, often on the ground, before a flight or after landing. They are also dependent on model’s power source and having small buzzers.

Thus I decided to develop my own lost model finder – MAK RC Model Finder (MRCMF) – under following assumptions:

Read moreMAK RC Model Finder